# automonty

The `automonty` tool performs network automation.  It is your [network moose](https://twitter.com/NetworkMoose) in mecha form.

## Requirements

At [FAELIX](https://faelix.net/) we run AS41495 which comprises VyOS-based BGP-edge routers and MikroTik RouterOS-based internal routers.  We automate our VyOS edge with [hphr](https://gitea.faelix.net/FAELIX/hphr) and our MikroTik interior with `automonty`.  You too will need RouterOS-based devices to make use of `automonty`.

Ensure that you have access to the RouterOS API.

## Installation

```shell
git clone https://gitea.faelix.net/FAELIX/automonty
cd automonty
mkdir .venv
pipenv install
pipenv run ./python automonty --help
```

## Usage

### Configuration File

Create `~/.automonty.yaml` as follows:

```yaml
router:
  gama.m.faelix.net:
    group:
      - x4
      - x5
  soto.m.faelix.net:
    group:
      - x4
      - x5
  janszoon.d.faelix.net:
    group:
      - x5
      - x7
  kotzebue.n.faelix.net:
    group:
      - x5
      - x7
  teixeira.x.faelix.net:
    group:
      - x5
      - x7

loopbacks:
  - 46.227.200.1/32
  - 46.227.200.2/32
  - 46.227.204.1/32
  - 46.227.205.1/32
  - 46.227.207.1/32
  - 46.227.207.255/32

default_ipv4_loopback: 46.227.207.255/32

routing_filter_chain: automonty
```

We have specified:

* a set of routers and to which groups they belong
* a set of loopback addresses which should be treated specially
* a default loopback address which is used as the anycast IPv4 default gateway for guests (VPSs, layer-2 circuits, etc)

### Credentials

You can set credentials via environment variables:

```shell
export AUTOMONTY_USERNAME=monty
export AUTOMONTY_PASSWORD="m00se<3p0t4t0"
pipenv run ./python automonty check
```

### Invoking Commands

#### Provisioning

#### Tearing Down

#### Migration